How to Waterproof Work Boots?

We eventually waiting for winter excitingly but, usually, it comes with some problems. One main problem is, it will wet our work boots, you have to waterproof your work boots. I will describe in this article how you can do it at your home.

You can waterproof your leather work boots too. But there are some advanced methods to waterproof them. Do not worry, in this article I will tell you all the possible ways to waterproof work boots.

How do I make my work boots waterproof?

Prepare for Waterproofing

Before starting the waterproofing treatment must ready your boots for that so they respond quickly to the treatment. Finally, you will get the best from it.

Cleaning Process

This preparation starts with cleaning the boots, so please do it first. If your work boots are brand new or cleaned so, no need to clean them again.

Dirt can be a hurdle in the waterproofing process. However, cleaning boots can extend their life. So focus on cleaning your boots first.

To get the most from your waterproofing treatment make sure you follow the following step.\:

  • Remove the laces from the boots
  • Rub with a brush to remove dirt and grime
  • Clean its insole, if it has cracks, and the crakes fill with mud, use water to remove it
  • You can use a dish scrapper to remove mud if needed
  • Now use a piece of cloth to dry the extra water
  • Apply some leather oil to lock the moisture
  • Now leave your boots and do dry them on air
  • Once dry, Your boots are ready to waterproof

4 Best Way to Waterproof Work Boots

There are multiple treatments for different types of boots and have many ways to apply them. So before implementing any treatment, make sure you are going to apply treatment to the right product. If you think this is irritating process I recommend you to visit the best waterproof boots for work article and find the best pair for you.

By Applying Spay

Sprays made easy the process of waterproofing the work boots. There are specific sprays to waterproof work boots made especially for nuckbuk, and suede materials. But these are not so great for full-grain or synthetic materials.

For nubuck and suede material sprays don’t need 2nd layer for waterproofing. That’s why they are great for these leather types.

Spray your boots but take the can far from the boots about six inches and apply with a thin layer. You have to check the product instructions for each if the second coat is needed.

Keep in mind while buying a spray, try to purchase a branded spray. Usually, sprays are affordable. I am recommending a spray. You can use the following one.

 
Best Spray
9/10
Our Score

Guard – Premium Water & Stain Repellent – Waterproof and Protect

  • PREMIUM REPELLENT
  • SAFE FOR ALL MATERIALS
  • SILICONE-FREE

Wax Method

The wax method is suitable for leather and suede material but not for synthetic. Before applying wax on your boots, slightly warm them with a hairdryer and implement it with a clean cloth. Buff it as it will shine, but remove any excess wax first.

This process can take much time, but it will be great for those working in nooks.

Apply Cream

The cream is a very great option but only for leather pairs of boots. You can waterproof your shoes by applying the cream. To apply, you can use any cloth or with an applicator come with the cream. After applying, rub it across the boot. Whether your boot has hard to reach an area, get to it with a clean cloth.

Waterproofing Oils

Waterproofing with oils is beneficial for almost all types of work boots. Apply oil to keep your pair away from unwanted moisture, and it will also improve their lifespan. You can apply oil at the uppers of your boots. But do not use oil excessively. Using oil in excess can cause colour loss, and fibres can be separate from leather.

Waterproofing Pastes

Waterproofing products also come in the form of pastes. You have to choose one of them according to your needs. Once you chose the product, just apply it to your boots.

The method to apply waterproofing paste is the same as other methods. First of all clean your boots and let them dry. Now apply the paste to your boots with a clean cloth, and rub the cloth with a to-and-fro motion.

Avoid These Things When Waterproofing Your Work Boots

  • Use a hairdryer to heat the compound and boots rather than direct flame.
  • Make sure you cover the area near the soles very well if you used wax or cream or any other compound.
  • Check before starting the treatment if your boots have Gore-Tex membrane you don’t need any waterproofing treatment. Must read the manufacturers guidelines before using any waterproof compound.
  • Waterproofing compounds can dark your leather boots if you don’t want to be darker try this near the heels first.

Conclusion

It’s important to know that the best time to waterproof your work boots is after they’ve been worn for a while. The boots need to be dry before you apply the waterproofing product. After you have applied the waterproofing, you should wait at least 24 hours before putting them back on.

FAQ’s

Is waterproof spray permanent?

No, it is not. It only seals the water. If the seal fails, you can still get wet. You might want to buy a pair of boots that already have a waterproof layer. However, waterproofing spray is easy to use and can last long if it is used properly.

It’s important to make sure the boots are completely dry when you put them in the waterproofing product. Waterproofing spray may cause discolouration. If this happens, you should let the boots dry before you wear them again.

Does waterproof spray work on new boots?

Some people think that you should waterproof the boots when they are new. This can work, but it takes time to achieve the best result. It’s a good idea to waterproof your boots after the leather has dried out.

You should wait at least a week before you apply the waterproofing product. It is important to dry your boots before you put on waterproofing spray. The more you wear your boots, the easier it will be to waterproof them.

Leave a Comment